HP Printer comes with high definition features where the printing quality is commendable. HP printer is the most trusted product among the users. But at times, HP Printer can also trouble up with technical errors which can irritate the user of the HP Printer. Errors like HP Printer error 0x18a0101 is a kind of error that is seen occurring in the HP Printer. Technical errors are a frustrating factor and to remove this you can also take the help of the HP Printer Support team.

Today, in this article we will be discussing the HP Printer error 0x18a0101 solutions to easily remove it from the printer. The following steps are:

Steps to fix the HP Printer error 0x18a0101:

Step 1:

At first, go to the ‘Support Menu’ and then press and hold the left arrow key. Next, select the ‘Setup’ key and then release both the keys. Select the ‘OK’ button when you see the "Enter Special Key Combo”.

Next, when you notice "Support” and the FW rev, you will need to press the right arrow button until it tells "System Configuration Menu”. Next, release the "OK” button. When you notice the message displaying "Hardware failure status clear” then you will need to press the OK button to clear it. Next, hit the OK button when you notice the "Hardware failure status cleared and cancel to continue.

Select the "Cancel” button when you notice the "Welcome to Photosmart Express” message appears in the "Ink System Failure” .Try to use the power button and then unplug the power cable from the back of the printer and wall outlet.

Next, wait for about 30 seconds and then plug the power cable in the wall outlet. After that, turn the unit on. You will notice the "Use power button to shut down the printer” message following "Press ok to continue”. You will need to press ok. This will make the printer start "One-time ink initialization process”. Once you finish up the process you will notice the Diagnostic Page. To check if the process is done in a proper way tries to the self-test page.

Step 2:

In this step, you will need to press and hold the "key on the keypad”, and then press the "#” key to release both the key. Next, type ‘123’ for entering the maintenance mode. Next, select the right arrow until you see the Config. menu getting appeared on the panel.  Press the OK button to clear up the error. Following by, canceling two or three times to return to the top menu.

These are the solutions in troubleshooting the error from your printer. If you see both the solutions not working then the trouble might occur in the ink absorber. Sometimes the ink absorber gets full and needs to be replaced and to fix this you will need to replace the pad.

You can solve out the issue by following this step but if you find difficulty in solving out the problem then you can try to take the help of HP Printer Support team. The team eventually helps out the customers that are troubled up with HP Printer queries. To get their help you can call at +1-888-621-0339 and the team members will troubleshoot the queries over the phone. You can subscribe to their monthly or yearly packages to get the best customer service to provide by the team members. 

Posted by: emasmith at 10:29 AM | No Comments | Add Comment
Post contains 572 words, total size 6 kb.